Passive-to-Active Radon System Upgrades
Turning Your Existing Radon System Into Full Protection
Many newer homes are built with what’s called a passive radon system. This system uses simple ventilation piping, often routed from beneath the foundation up through the roof, to allow some radon gas to escape naturally. While it’s a step in the right direction, passive systems often don’t lower radon levels enough to meet EPA safety guidelines.
That’s where BreatheWell Radon Solutions comes in. Our team specializes in upgrading passive systems into
active mitigation systems by adding a properly sized radon fan. This creates continuous suction beneath the slab or crawlspace, pulling radon gas out before it enters your home.
Why Upgrade From Passive to Active?
- Health Protection: Radon is the second leading cause of lung cancer in the U.S. Even low levels can be harmful over time. Upgrading ensures stronger, more reliable protection.
- Peace of Mind: With an active system, you’ll see a measurable drop in radon levels, often well below the EPA action level of 4.0 pCi/L.
- Real Estate Value: If you plan to sell your home, buyers and inspectors often look for active radon mitigation—not just passive piping. An upgrade can add value and confidence to the transaction.
- Low Operating Costs: A radon fan typically costs less than $5 a month to run. That’s a small price for round-the-clock protection.
Our Upgrade Process
- Assessment – We inspect your passive system, measuring radon levels and checking pipe placement, venting, and exterior discharge.
- Fan Installation – We select and install the right radon fan for your home, ensuring proper airflow and quiet operation.
- Sealing & Optimization – Any cracks or openings in the slab or sump lid are sealed for maximum efficiency.
- Post-Upgrade Testing – We verify that radon levels have dropped and the system is working effectively.
The result is a clean, professional upgrade that blends into your home and works 24/7 to keep your air safe.
Why Choose BreatheWell Radon Solutions?
- Radon Experts: We focus only on mitigation—not testing—so our entire craft is building systems that work.
- Proven Results: Every upgrade is tested after installation so you don’t have to wonder if it’s working.
- Local Knowledge: We understand the soil and building conditions in our region, so we design solutions that last.
- Professional Care: From discreet installations to clear explanations, we make the process simple and stress-free.
Take Control of Your Home’s Air
If your home was built with a passive radon system, don’t assume it’s enough. Upgrading to an active system is the most effective way to protect your family’s health and safeguard your property.
BreatheWell Radon Solutions makes the upgrade easy, affordable, and reliable.
Call Now.
Contact Us
Radon System Upgrade FAQ
How do I know if I have a passive radon system?
Most passive systems look like white PVC pipe running from the basement or crawlspace up through the roof. If there’s no fan attached outside or in the attic, it’s passive.
Do all passive systems need upgrading?
Not always, but many do. Testing will confirm if your radon levels remain above the EPA’s recommended threshold. If they do, an upgrade is strongly advised.
Will adding a fan be noisy or noticeable?
Not at all. Radon fans are quiet, and we place them in discreet areas like the attic or outside of the home.
How long does the upgrade take?
Most upgrades can be completed in just a few hours.
Will this lower my energy bills or raise them?
The fan uses very little electricity—often less than running a household light bulb. The safety benefits far outweigh the small cost.